Painted Pillow Tutorial

20140419-204546.jpg

You may recall that I made some pillows for my sisters once upon a time. Well, my sister Susie requested another… she had changed her bedding and the magenta one I had made a couple of years ago was clashing with her new orange decor. I grabbed another pillow case on a recent trip to IKEA and put off making this pillow for months. Hey, I’m a busy girl! Lucky for me Susie would not let me forget that I had promised a new pillow.

20140328-221035.jpg

 

One side of the finished product is above. I chose chevron for this side and the other side is a monogram shown later in this post. But here’s how I did it.

 

You will need:

Pillow case (I used Ikea’s GURLI)

Fabric paint (I used Tulip brand)

Painter’s tape

Paint brushes

Hair dryer

Optional: stamp, stencils, templates, sponges… really any paint technique that can be applied to fabric is a possibility for this project.

 

20140328-221108.jpg

 

I started with an Ikea GURLI pillow case this time. The last one I used was thicker with a chunkier weave that made painting a little difficult. The GURLI is thinner with a tighter, less textured fabric that I thought may lent itself better to painting with a brush by hand. It was just as┬áinexpensive ($4). I lined the inside of the pillow case with foil so that no paint would bleed through to the opposite side. I figured foil would do the job but hold it’s shape (and stay in place), stay smooth and be easier to work on than newspaper or plastic. I made sure the foil went all the way to each edge a corner, which meant overlapping two pieces. I knew I’d be painting edge to edge on at least one side so it was important to cover the entire interior with a barrier.

20140328-221119.jpg

Then I taped out my design. I wanted a bold solid colored block border. I used the width of my painter’s tape to make my border. This eliminated sketching/marking and measuring. I also extended the tape passed the end of the pillow so that the pillow was taped in place for safety (from my clumsy self). I eye-balled the inside edge tape but it would be a simple 1 inch measurement if you aren’t a great guestimater. I made sure I had straight corners, which require an extra piece of tape here and there. TIP: To ensure against bleeding it is helpful to smooth the tape down well with the edge of a book, credit card or just your finger.

 

20140328-221128.jpg

I brushed thin, even coats of fabric paint for the border. Be sure not to saturate the fabric or the tape. That may cause the paint to bleed under the tape. If you don’t get good coverage with one coat then go for a second coat of paint. Its a safer bet to do two lighter coats rather than one heavy one. I especially wanted a clean and sharp edge so I took the time to touch up bare spots and do an extra coat where┬áneeded.

 

20140328-221138.jpg

 

I free-handed a monogram onto the center of the pillow. I frequently do free-hand monograms so I felt confident. I really only measured a few reference points to determine where the center of the pillow was. If you aren’t comfortable with free hand lettering then consider lightly sketching with a pencil or maybe even try to trace through the fabric, use a projector or a ruler.

 

20140328-221148.jpg

I waited for the paint to dry thoroughly before removing the tape. Afterward, I used my hairdryer to “set” the paint and to dry it even more. You can’t be too careful!

 

20140328-221035.jpg

For the chevron side, I used my same tape method as I did for my border on the opposite side. I determined center and used the tape to make the chevron. Again, I made sure I had sharp corners and smoothed over the tape to prevent bleeding. I opted to used the white fabric as one of the chevron stripe colors and alternated gray and orange.

When the pillow was finished, I removed the foil (which was extremely effective) then washed and dried it according to my paint and pillow case directions (cold, tumble dry low). This eliminated the stinky fabric paint smell and the heat of the dryer further set the paint (according to the label on my paint at least).

20140328-221043.jpg

 

Susie is happy with the pillow and so am I! For a no-sew project this makes a pretty awesome pillow. And the possibilities are endless!

 

PSSST: I bought a second pillow case for myself but I haven’t been brave enough to commit to a design for my own house!

Hex of a Good Time

20130625-082247.jpg

Obviously it has been busy around here. I try to post weekly at the minimum but summer is proving to be a busy beast. I have done quite a few projects, its just that getting to post them is harder than expected. Any who… this might be my first outdoor project since the teal front door reveal. We’ve been hard at work giving our house a little curb appeal (on our little budget). We’ve learned that sometimes a little elbow grease can go further than a few bucks. This project is a great example.

It all started with my love of this rug.

outdoor rug love

The catch? It is $345. I also love this one. Too bad it was on sale for $749. No thanks. One day when my children outgrown spilling things and we graduate from plastic patio furniture then perhaps I will spend a car payment (or two!) on an outdoor rug. But for now DIY is way more realistic for the budget. I did a similar project last year for a whopping $10. After the weather, birds and sun did it in, my lovely hubby secretly tossed it in the trash. And then I nearly cried. This year we begin again.

I bought a large 6’x9′ canvas drop cloth at Home Depot for $8. They come in a variety of dimensions and most are under $10! I chose the size because I knew we had the 6 chairs to put around it and the arrangement worked nicely last year. Then I doodled a few geometric patterns on cardboard until I found one I liked (and even labeled it so). I chose this hexagon shape for other reasons too. I figured filling straight lines with paint mind be easier especially because it had to be done repeatedly. I also really enjoyed the honeycomb design it makes once its repeated. After making the design template shapes, I added little tabs on each side so it would be easy to line up with fellow hexagons as it was traced. Then I cut that bad boy out and got to work.

20130528-222750.jpg

I had leftover fabric paint from other projects so that determined the colors which happen to match the chairs well. Only happy accidents around here, people! Molly traced and I painted. We laid the canvas on a tarp as we worked on each section so that we didn’t have paint bleeding through on the deck (Which will be refinished soon. I hope.). And we got some sun. Two birds with one stone!

20130528-222728.jpg

Here is a look at how it came together as we went. And then something hilarious happened: we ran out of paint. Oh yes, that was soooo funny. So guess what? We went ombre. I had pink and purple of the same paint. So now we went from blue to purple to magenta. Another happy accident. I actually love the way it looks.

20130528-222738.jpg

So here is a look at the finished project. a sweet honeycomb rug for $8. And it goes nicely with the blue chairs. Those windows back there are old flea market finds. I’d love to hang them on the fence one day but I just can’t commit. Just the other day I was day dreaming about one being in place of artwork over our headboard in the master bedroom. Now if I can just make that nasty nineties red stain disappear.

20130625-082235.jpg

20130625-082247.jpg

I spend at least one night a week out here. Sometimes we enjoy a drink or dessert after O goes to sleep or we get out her baby pool and let her splash around while hubby grills. Next: fire pit, flowers and a party. You’re all invited!